On This Page

Authentication

The skysync-cli requires authentication information to be passed in with every command.  There are two ways to provide this information, in-line with the command or within a file.

Example 1: Command line parameters

In this example, the authentication parameters are provided via the command line with the request to list the connections.  The parameters within the two curly braces (including the braces) will need to be replaced with valid values.

Command with variables

skysync-cli --username={{username}} --password={{password}} --server=http://{{server IP address}}:{{server port}}/ connections list

Command with example values

skysync-cli --username=admin --password=somePassword --server=http://111.111.111.111:9090/ connections list

Example 2: Parameters provided within a file

In this example, the authentication parameters are provided within the configuration file.  The parameters within the two curly braces (including the braces) will need to be replaced with valid values. The skysync-cli.json must be in the working directory.

Command

skysync-cli connections list

Contents of skysync-cli.json

{
	"server": "http://{{server IP address}}:{{server port}}/",
	"username": "{{username}}",
	"password": "{{password}}"
}

Example 3: Parameters provided by environment variables

In this example, the authentication parameters are provided by environment variables.  The parameters within the two curly braces (including the braces) will need to be replaced with valid values.

Command

skysync-cli connections list