Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

On This Page

Table of Contents
stylenone

Overview

You can add a new data source to the default Discover scan so the scan will start returning results for the data source.

...

Click Assign on the Location page.

...

...

Click Assign a data source.

...

...

Expand the Data source list and click Add new data source. Do not select a data source from the list that displays. Those data sources are being used by Govern, and selecting one will cause issues with the policy scans.

...

...

Discover scan using the Add scan button on the top of the Scans page. This opens the Discover Scan Setup. You will simply work your way through the Discover scan setup wizard to configure the scan. This includes specifying the location you want to scan, selecting the templates you want the scan to use, and designating the schedule for the scan.

...

Data Source

The first step is in the Discover Scan Setup is to select if you will be using a location or document set for the scan. A location allows you to select a connection and path to scan. A document set allows you to select a saved scan result to rescan. Expand the section below based on the option you want to select to view the instructions.

...

Expand
titleScan Location
  1. Verify Scan location is selected.

  2. The Connection list displays all connections created in the application. Initially, it displays the first 100 connections. If you have more than 100 connections, use the Load more link to display additional connections as needed. Select the connection for the

...

  1. scan you are creating. (If the connection you want to use does not already exist, you can use the Add connection link above the list to create a new connection.)

  2. If impersonation is available for the connection, a Run as User toggle displays. Impersonation allows a site admin access to all the folders on the platform, including those that belong to other users. Turn on this toggle if you want to use impersonation and then select the user you want to access.

...

  1. A window displays all the directories on the selected connection. Select the directory you want to use. Click the Load More link to load additional directories in the list as needed. You can drill into each directory by selecting the right arrow that displays when you hover on the directory name. You can also manually specify the path to use.  

...

  1. Data Sources Page Location.pngImage Added

  2. The Create as

...

  1. mapped location

...

  1. toggle allows you to create the location as a mapped location.

...

  1. When DryvIQ scans this location, it creates individual child

...

  1. scans for every folder in this directory. All scans are

...

  1. managed at the child

...

  1. scan level. See Child

...

  1. Scans for more information about managing these scans.

  2. Click Next to advance to the Discover Categories step.

Expand
titleScan Document Set
  1. Select Scan Document set.

  2. Select the document set from the list of available document sets that displays.

    Data Sources Page Document Set.pngImage Added

  3. Click Next to advance to the Discover Categories step.

Info

Document sets that have been assigned to an intelligent migration will not be available in the list to select to be used for a Discover scan.

...

Discover Categories

This step allows you to select the standard templates you want to add to the Discover scan. For locations

...

By default, scans must be manually triggered to run. If you want to set a data source scanning schedule, turn on the Data source scanning schedule toggle and specify the information for the scanning schedule. For mapped locations, the schedule only applies to the parent location. Scans for child locations must be manually triggered.

...

...

Click Done to save the data source.

...

Click Location at the top of the page.

...

, File Inventory is always included in the Discover scan and cannot be turned off. However, you can choose to add additional categories to the scan to meet your needs. For document sets, File Inventory will not be included in the scan since all the items in the document set will already have been run against the File Inventory template, and scanning them against it again would be redundant.

Each template provides a speed and scope key to help you understand the depth of analysis the template provides and how that will impact the speed of the Discover scan. Deeper scans will run slower but reveal more information or refined classifications. Keep this in mind when building your scan.

...

Info

If a category is unavailable for selecting, the supporting entity type is not installed in your DryvIQ Platform.

The Miscellaneous category contains all the custom entity types created in your DryvIQ Platform. If you want to add a custom entity type to the Discover scan, you should add this template to the scan. You can then use the configuration option for the Miscellaneous template to select just the specific custom entity type that you want to add to the scan you are creating.

  1. Click to select the box in front of the template name. A check mark appear in the box to indicate it is selected.

    Selected Category.pngImage Added

  2. Selecting a template selects all available categories in that template. DryvIQ recommends leaving the default categories for each template. However, if your use case requires a specific set of categories, you can edit the template categories as needed. The exception is the File Inventory template, which cannot be edited. To edit a template, click the gear icon on the template card.

  3. The corresponding modal opens and displays the categories for the selected template. Expand a category to view the included entity types. Clear the box for an entity type you do not want to include in the template.

  4. Click OK when you are finished adjusting the categories.

    Edit Template Entity Types.gifImage Added

  5. Repeat steps 1-4 for each template you want to select.

  6. Click Next to advance to the Schedule step.

...

Schedule

The Schedule step allows you to assign a schedule to the scan. If no schedule is assigned, the scan must be run manually. If enabled, the scan will run automatically based on the defined schedule. There are multiple settings available to customize the scan schedule.

Note

If you are creating a scan for a mapped location or document set, the schedule applies to the child scans only. The scan for the primary scan will run every six hours and create new child scans as needed.

...

  1. Select the Enable schedule.

  2. Complete the schedule fields based on the schedule you want to use. Expand the Scan Schedule Options below to learn about each schedule option.

  3. Click Next to advance to the Review step.

Expand
titleScan Schedule Options

Starting on

Use this field to specify a starting date for the scan; the first scan will not run until this date. This allows you to create a scan but not start the scan until a later date. This would be useful, for example, if you are adding multiple scans but want the scans to run in waves rather than all at once. You can add scans at the same time and just set different starting dates. You only need to add a date to this field if you want the scan to start running on a date later than the date you are creating the scan. Leave this field blank if you want the scan to start running immediately. This field can be used in combination with all other schedule fields. 

Scan on

Use this field to specify which days of the week you want the scan to run. By default, all days are selected. You can clear days by clicking on a day in the list. The check mark in front of the day is removed, and the day no longer appears in the field above the list. Similarly, click on a day without a check mark to select the day to include it. Setting days can be useful in creating waves of scans since you can set the scans to run on alternating days, or it can be useful to set scans to run on days where activity is minimized (such as weekends). This field can be used in combination with all other schedule fields. 

Starting On.pngImage Added

Scan every

By default, the scan is set to run once a day. You can use this option to set the scan to run on a different time interval. Specify the number and select if it is minutes, hours, or days. The time determines when the scan will run after the previous scan completes and not specific increments of time. For example, the default value is 1 day. This means the scan will run 24 hours after the previous scan completes.

This option can be used in combination with the Starting on and Scan on fields. It cannot be used in combination with the At a specific time option. 

When you select this option, additional fields display that allow to control the time frame for the scan as well as the number of times the scan will run per day. 

Scan Every.pngImage Added

First scan start time

Use this field to specify a start time for the first scan in the schedule.  If a time is not specified, the first scan will start after midnight. Specify the time using the format HH:MM XM or click the clock icon to select the time.

Scan stop time

Use this field to specify the time you want the last scan to start.  If a time is not specified, the last scan run will start no later than midnight. Specify the time using the format HH:MM XM or click the clock icon to select the time.

Maximum number of daily scans

Use this field to specify the number of times you want the scan to run in a day. Once the scan runs this many times, it will not run again until the next day.


At a specific time

Use this option to set the scan to run at a specific time of the day. This may be useful if you prefer scans to run only during off hours. This option can be used in combination with the Starting on and Run on fields. It cannot be used in combination with the Scan every option. 

At a Specific Time.pngImage Added

Scan at

Specify the time here using the format HH:MM XM or click the clock icon to select the time. The scan will run at that time for all the selected days.

...

Review

The Review page displays all the configuration options selected for the scan so you can review the settings and make edits as needed. You will also assign a name to your scan on this page, which is a required step before saving the scan.

  1. Type the name you want to assign the scan in the Name field and click Done to save the name.
    For document sets, the selected document set will be renamed with the scan name entered here and will be locked from further editing. The new name will be displayed on the Document sets tab in the Results saved views. 

    Add Scan Name.pngImage Added

  2. The rest of the page displays the configurations selected for each step of the Discover Scan Setup. Review the information. If you want to change anything, click Edit next to the section heading (or click the heading in the menu on the left).

    Edit.pngImage Added

  3. This will take you back to the corresponding page so you can make the necessary edits. Click Next to advance through the remaining setup pages or click Review in the left menu to return to the Review page.

  4. Once you are finished reviewing the scan setup, click Save. You are presented with two options:

    Save Options.pngImage Added

    1. Save scan: This saves the scan with no further action. The scan will follow the schedule that has been set. If no schedule has been set, the scan must be triggered manually.
      Note that the primary scan for mapped locations and document sets will run as soon as the scan is saved to create the child scans. However, the child scans will not run once the primary scan is complete. The child scans will run according to the schedule set for the scan. If no schedule has been set, the scans will need to be run manually.

    2. Save scan and run it now: This saves the scan and triggers the scan to run. Once complete, the scan will then follow the schedule that has been set for the scan. If no schedule has been set, subsequent scans must be triggered manually.

  5. The scan is added to the All Scans page.